Sludge Testing Service

Sludge Testing

1. Introduction to Sludge Testing

Sludge refers to the sediment, particulate matter, and floating materials generated during the treatment of wastewater by physical, chemical, physicochemical, and biological methods. Sludge generally denotes a thick substance between liquid and solid, which can be transported by pumps but is difficult to separate into solid and liquid through sedimentation. The suspended solids concentration is typically between 1% and 10%; below this concentration, it is often referred to as slurry.

Sludge testing involves sampling and analyzing sludge to determine the types and concentrations of pollutants within it.

Sludge identification entails distinguishing the hazardous characteristics of sludge based on test results, determining whether the sludge is general solid waste or hazardous waste.

2. Sludge Classification

(1) Based on its source, sludge can be categorized as:

Municipal sludge: Primarily refers to sludge from sewage treatment plants, which constitutes the largest volume of sludge. Additionally, sludge from water treatment plants, also originating from municipal facilities, can be included in this category.

Pipeline sludge: Sludge from drainage collection systems.

River and lake sediment: Silt from rivers and lakes.

Industrial sludge: Mixtures of solids, water, oil, chemical contaminants, and organic matter generated from various industrial production processes.

(2) Based on different wastewater treatment methods, sludge can be classified as:

Primary sludge: Sediment produced during the primary treatment of wastewater.

Activated sludge: Sediment generated in the secondary settling tank of the activated sludge treatment process.

Humus sludge: Sediment produced in the secondary settling tank of biofilm treatment processes (such as biological filters, rotating biological contactors, and some biological contact oxidation tanks).

Chemical sludge: Sludge generated after chemically enhanced primary treatment (or tertiary treatment).

Sedimentation sludge: Sludge intercepted in primary sedimentation tanks, including physical sedimentation sludge, coagulated sedimentation sludge, and chemical sedimentation sludge.

3. Service Scope

(1) Sludge testing;

(2) Identification of sludge hazardous characteristics;

4. Testing Items

Physical and chemical indicators testing: Odor concentration, chloride ion, bomb calorific value, lower heating value, higher heating value, particle size, sand content, bulk density, etc.

Industrial analysis: Moisture, volatile matter, ash content, fixed carbon

Elemental analysis: Total sulfur, carbon, hydrogen, nitrogen, oxygen, ammonia, sulfur, etc.; silicon dioxide, aluminum oxide, iron oxide, calcium oxide, magnesium oxide, titanium oxide, potassium oxide, sodium oxide, ash composition testing for manganese dioxide, etc.

Ash fusibility testing: Deformation temperature, softening temperature, hemispherical temperature, flow temperature, etc.

Pollutant testing: Total copper, total zinc, total cadmium, total lead, total chromium, total mercury, total plating, total barium, total nickel, total silver, total arsenic, total selenium, alkyl mercury, fluorides

Biological testing: Total bacterial count, activated sludge bacteria, microbial community genomics, etc.

5. Relevant Standards

"Test Methods for Sludge from Municipal Wastewater Treatment Plants" CJ/T 221-2005

"Quality of Sludge from Municipal Wastewater Treatment Plants for Agricultural Use" CJ/T 309-2009

"Discharge Standard of Pollutants for Municipal Wastewater Treatment Plants" G18918-2006

"Method for Determination of 26 Elements Including Copper, Nickel, Lead, Zinc, Cadmium, and Chromium in Sludge from Industrial Waste Liquid Treatment" GB/T 36690-2018

"Methods for Reduction and Disposal of Electroplating Sludge" GB/T 39301-2020

"Determination of the Ultimate Anaerobic Biodegradability of Plastic Materials in Controlled Sludge Digestion Systems by Measuring the Release of Biogas" GB/T 38737-2020

"Control Standards for Pollutants in Sludge for Agricultural Use" GB 4284-2018

"Quality of Sludge from Municipal Wastewater Treatment Plants for Forest Land Use" CJ/T 362-2011

"Control Standards for Pollutants in Sludge for Agricultural Use" GB 4284-1984

"Quality Requirements for Sludge from Municipal Wastewater Treatment Plants for Landscaping Use" GB/T 23486-2009

"Quality Requirements for Sludge from Municipal Wastewater Treatment Plants for Co-landfilling" GB/T 23485-2009

"Quality Requirements for Sludge from Municipal Wastewater Treatment Plants for Land Improvement" GB/T 24600-2009

"Quality of Sludge from Municipal Wastewater Treatment Plants for Brick Making" GB/T 25031-2010